Installing a Sump Pump

Installing a Sump Pump

Does your basement flood or have a musty smell after heavy rain? Consider installing a sump pump. A sump pump channels all groundwater away from your home into a sewer line or storm drain.

Sump Pump

It also keeps your house free from long-term damage caused by water. It can help prevent flooding and reduce mold and mildew. For professional assistance, call Plumbers Aurora CO.

If your basement is prone to flooding or you live in an area that experiences high groundwater, a backup sump pump can protect your belongings and keep your home from water damage. Unlike a battery backup pump, which can run for only four to five hours and needs to be recharged regularly, a water-powered sump pump will continue to remove floodwaters from your basement even if the power goes out. However, you need to have a municipal water supply to use this type of pump.

A water-powered sump pump uses the city’s water supply to move the water into the sump pit and then pumps it out of your house. These pumps are great if you have good city water pressure, which is typically around 40 to 80 psi. You can test your city’s water pressure by finding the nearest faucet or hose spigot and placing a one-gallon bucket underneath it. If the water fills your bucket in one minute or less, then your city’s water pressure is high enough to operate a water-powered sump pump.

Compared to a battery-powered pump, a water-powered pump consumes much less municipal water to operate. It also does not have moving parts that can break down, and it has a very low maintenance cost. You can install a water-powered sump pump in your basement easily by connecting the suction pipe to the existing discharge pipe leading from your primary pump and running a new 1 1/2-inch-diameter discharge pipe to the check valve on the water-powered pump. You must also install a reduced-pressure backflow preventer on the water line connected to the pump.

If you have a good city water supply, a water-powered sump pump is an excellent choice to avoid costly repairs to your furniture and appliances when the basement floods. It also protects your valuables and keeps mold spores from growing in the basement, which can cause health problems when inhaled. However, if your city’s water pressure decreases during a long storm, the pump may not be able to keep up with the water flow, and you could experience a basement flood.

Battery backup

A sump pump is a critical part of keeping your home free of water damage. Unfortunately, if the device fails during inclement weather or when the power goes out, your home can quickly flood and cause major water damage. A battery backup system can prevent this by providing a secondary pump to keep your basement from flooding. A typical battery backup sump pump has a large 12-volt battery and an AC/DC converter that switches from AC wall current to battery power during a power failure.

It also has a second heavy-duty pump attached to the battery. When the water level rises to a certain height, the pump is activated and begins sucking the water up and away from the home through a pipe. The pump can typically run for up to eight hours before the battery is depleted.

Battery backup pumps are generally less expensive than water-powered pumps and require fewer frequent replacements. However, it is important to check the batteries regularly for signs of wear and tear. They are prone to corrosion and should be replaced as soon as they show signs of wearing down or losing their charge.

Some battery systems can be upgraded to a smart system that allows homeowners to monitor their sump pump status remotely. This can help them identify problems before they become costly and reduce the amount of maintenance needed. Smart float switches can also help protect against some common problems that may cause the sump pump to malfunction or fail.

A common reason for sump pump failure is that the float switch gets clogged or jammed. A smart float switch can prevent this from happening by sending an alert to the homeowner when it needs attention. In addition, it can also be programmed to re-test the sump pump on a regular basis.

While having a primary sump pump is essential, having a backup can provide added peace of mind when inclement weather or power outages occur. Without a backup, you may need to call in a professional, pay for water mitigation services, or replace damaged items in your home. Having a backup battery-powered sump pump can help you avoid these expenses and save your valuable belongings.


Before installing a sump pump, it is important to consider whether or not you need a permit. Many localities require a permit for drainage work, including the installation of a sump pump. However, the exact requirements vary from one area to another. Some states have very strict regulations regarding the location of a sump pump, while others have specific rules on how far it can drain water away from your home or other buildings. If you are not sure about the rules in your state, it is best to consult a professional.

The basic sump system involves drain tile, a sump pit (which extends into the basement floor), and a pump that pumps water to an outside storm drain or dry well. It is an excellent solution for houses that have basement flooding issues or wet floors and walls. It can also reduce the risk of rot and mold.

Installing a sump pump can be a difficult job, especially when you have concrete on your basement floor. Breaking through this material requires a sledgehammer or jackhammer and can be a dangerous task. In addition, the job is messy and requires a lot of labor. Luckily, you can save money by hiring a professional to complete the job for you.

If you are considering installing a sump pump in your basement, make sure to hire a licensed professional who will take care of all necessary permits. This way, you can be confident that your sump pump is installed correctly and won’t cause any damage to your house or property. The professional will also ensure that the pump is positioned properly and has proper backflow prevention devices to avoid contamination of your home’s water supply.

It is important to note that the sump pump must not discharge into the public right-of-way, sidewalk, or street. This can cause a nuisance to neighbors and may create cold weather flows that could freeze in the winter. In addition, this discharge can cause sanitary sewer backups. Therefore, it is essential to connect your sump pump to a catch basin or dry well on private property.


Sump pumps can be a cost-effective solution for homeowners who are worried about water damage. They are designed to help with the water buildup in your basement or crawl space, which is often caused by heavy rains and storms. A plumber can install a sump pump for you and ensure that your home is safe from flooding. A plumber can also install additional safety features, such as a battery backup, water level alarms, and pump filters.

Homeowners must prepare the area where they want to install the sump pump. This is typically the lowest point in the house, which means digging a hole large enough to fit the sump pump basin. Then, they need to lay the pipe for the pump’s discharge. This piping should be made of PVC and run from the rim header to the outside. They should also leave a small vent hole for air flow. Lastly, they should cement the pipe in place.

When the pump is running, the float will rise and fall with the water level. It is important to make sure that the float isn’t obstructed and that it can move freely up and down. If the float isn’t working properly, you may need to replace it with a new one.

A plumbing pipe attached to the pump’s outlet should direct water outdoors to a drainage location, such as a natural runoff point or a dry well. Many locales don’t allow sump pumps to drain into the sewer system, so check with your local town to see what options are available.

Besides the obvious benefit of preventing water damage, sump pumps also reduce the growth of mold and mildew in your basement. These fungi can cause structural damage to wooden joists in your home and lead to health problems such as respiratory ailments and allergies. In addition, they can attract ants, rodents, and other insects that can bring contaminants into your living spaces. In addition, excessive moisture wears down the wood in the walls and joists of your home’s structure, which can eventually lead to structural damage and weaken the foundation of your house.